
| Name | Value |
| Package | Tunable XFP |
| Data Rate | 10Gbit/s |
| Wavelength | ITU-U C-band |
| Connector | Duplex LC |
| Reach | 80km |
| Temp | 0-70 |
| DDM | YES |
| Fiber Type | SMF |
Sourcelight SLXFD-10GE-ZR-T series optical transceiver is a high performance and cost effective XFP transceiver modules designed for 10G SDH/SONET, 10G Ethernet DWDM fiber optic transmission applications, designed to support the full range of C-band ITU-T wavelengths data rates from 9.95Gbps to 11.3Gbs and distances up to 80km.
This transceiver contains both transmit and receive sections. An MZM, (C-band tunable laser with a wavelength locker) a laser driver and the supporting circuits constitute the transmit path while an APD ROSA, a post amplifier and the supporting circuit form the receive section. A microcontroller handles the communications between the module and the host board as well as the control and monitoring functions for both transmit and receive sections. A Clock and Data Recovery circuit (CDR) functions for both transmit and receive.
The transceiver module is fully compliant with the XFP MSA standard and can be hot-plugged into the 30-pin XFP connector on the host board. By limiting inrush currents, the device will not disturb the operations of the host board. The high-speed electrical interface is fully compliant with the XFI standard, providing transmission paths for the 10G signals.
| Package (Form Factor) | Tunable XFP DWDM |
| Data Rate (typical) | 10.3 Gb/s |
| Centre Wavelength | C-band 80 ITU-based channel |
| Distance | 80km |
| Diagnostics | Digital Monitor |
| Transmitter | mzm Laser |
| Receiver | APD photo detector |
| TX Output Power (dBm) | 0~+4 |
| RX Sensitivity (dBm) | -24 |
| Low/High Case Temperature | 0°C~70°C |
| Voltage Supply (typical) | 3.3v |
| Connector | Duplex LC/UPC |